What goes there is a small chip capacitor- however if you look at the soldering of this capacitor and compare it to the others on the board you will notice that it has been soldered in by hand rather than automatically machine soldered. All module 320 boards have this capacitor hand soldered and I suspect it has to be selected individually for each board and probably is something to do with the drive to the touch screen.
Module 320 boards also have to be spotlessly clean to work properly and yours is filthy! Don't dunk it to clean it, use a paintbrush with suitable cleaners and try to stay away from the red resin covered capacitors (the resin should protect them but never a good idea to chance it).
Be very careful of the fine wires connecting the analog pulse coil to the circuit board- they are in a very vunerable position (and also subject to leaky battery attack being just next to the battery).