It is currently 28 Mar 2024, 10:43


Microma 1974: what silver epoxy?

Owners of VINTAGE DSM and LCD watches post their topics over here
  • Author
  • Message
Offline
User avatar

simone

Guru

Guru

  • Posts: 965
  • Joined: 11 Jan 2012, 19:54
  • Location: Milan,ITALY

Microma 1974: what silver epoxy?

Post13 Dec 2019, 10:56

Recently I was lucky enough to get a donor module with a clear and crisp lcd panel for the chunky Microma 1974 (i have a NOS bought almost 6-7 years ago).
The module seems to be working as it should.
The only problem is related to some missing segments :-( , and the question is quite simple:
1) How gently remove the lcd panel
2) What silver epoxy apply (i think something like a glue or gel is better)...
3) How keeps in place the panel once removed

1.jpeg


2.JPG


:dwf:
You do not have the required permissions to view the files attached to this post.
Some watches are made to last only as long as they are fashionable
Some watches, simply are not made to last
Seiko watches are designed to withstand the ravages of both time and fashion
Someday perhaps, all watches will be made this way
Offline
User avatar

bruce wegmann

Pulsar Moderator

Pulsar Moderator

  • Posts: 1287
  • Joined: 02 Aug 2004, 02:13
  • Location: San Diego, CA

Re: Microma 1974: what silver epoxy?

Post15 Dec 2019, 10:04

Best conductive epoxy for a reasonable price...ebay item number 161121885337. Top-of-the-line...MG products, item number 231609627449 (probably too expensive to consider, unless you do a lot of this type of repairs). I use the MG for driver-transistor replacement on P2 and P3 modules. You need a sharp needle, a 15-20X magnifier, and a steady hand, but it does work. I'm not familiar enough with the specific watch to advise you on the mechanical disassembly/assembly.
Offline
User avatar

simone

Guru

Guru

  • Posts: 965
  • Joined: 11 Jan 2012, 19:54
  • Location: Milan,ITALY

Re: Microma 1974: what silver epoxy?

Post19 Dec 2019, 14:23

Thanks for the advice Bruce,
At the moment the watch is fixed with two soft thiknesses on the lcd and after one week is still working fine... i have to clean and lubricate the two recessed buttons :-D

Here the library link (thanks Adam!):

http://www.digital-watch.com/DWL/1work/microma-lcd-1974


:dwf:
Some watches are made to last only as long as they are fashionable
Some watches, simply are not made to last
Seiko watches are designed to withstand the ravages of both time and fashion
Someday perhaps, all watches will be made this way

Return to Vintage DSM and LCD Watches

Who is online

Users browsing this forum: No registered users and 33 guests

cron